Home » Products » Fan Coil Units (FCU) » OEM/ODM WIFI Heating Cooling Floor Standing Fan Coil Unit for Heat Pump & Chiller System

Share to:

OEM/ODM WIFI Heating Cooling Floor Standing Fan Coil Unit for Heat Pump & Chiller System

Availability:

Quantity:



Floor standing fan coil unit is a terminal equipment for central air conditioning water system. It can realize cooling and heating by circulating chilled or hot water inside the coil. Available in exposed or cabinet type, it requires no ceiling space for installation. Featuring simple structure, easy maintenance and independent temperature control, it is widely applied in offices, guest rooms and renovation projects where concealed installation is unavailable.
Inquire Add to Basket

Model:
Floor Standing Fan Coil
Brand:
Nulite New Energy

Floor standing fan coil unit is a terminal equipment for central air conditioning water system. It can realize cooling and heating by circulating chilled or hot water inside the coil. Available in exposed or cabinet type, it requires no ceiling space for installation. Featuring simple structure, easy maintenance and independent temperature control, it is widely applied in offices, guest rooms and renovation projects where concealed installation is unavailable.

Product Advantage

High-efficiency heat exchange coil

Adopts seamless copper tubes with hydrophilic aluminum fins. All coils pass 3.3MPa hydraulic pressure leakage test. Heat exchange efficiency rises by 18%, supporting fast cooling and heating for hydronic fan coil systems.

Flexible exposed floor-mounted installation

This vertical exposed FCU needs no ceiling space, ideal for renovation projects. It supports 2-pipe and 4-pipe water systems, matching chillers, air source heat pumps and boiler HVAC terminals.

Ultra-low noise & stable fan performance

Dynamic balanced fan wheel reduces vibration. Sound level can reach as low as 28dB(A). 3 adjustable fan speeds deliver stable airflow, making this low noise floor mounted fan coil suitable for offices and hotel rooms.

4. Robust structure & convenient maintenance Thick anti-corrosion steel casing extends service life. Removable front panel and washable filter simplify daily inspection. Our factory has over 15 years of HVAC manufacturing experience for reliable quality control.

5.Customizable capacity & wide compatibility Multiple model options cover different airflow and cooling capacities. It supports OEM/ODM on casing color and control panel, fits global voltage standards for worldwide hydronic air conditioning projects.

floor_standing_fan_coil_unit_scene_2010x782

Application Scenarios of Floor Standing Fan Coil Unit

1. Hotel Guest Rooms

The floor standing fan coil unit features easy installation and low noise. It provides stable cooling and heating, perfectly meeting comfortable temperature demands for hotel guest rooms and boutique hotel indoor environments.

2. Office & Commercial Spaces

This floor mounted hydronic fan coil suits various office areas and commercial rooms. With adjustable wind speed, it delivers uniform air supply and creates a comfortable working environment for long-term office use.

3. Building Renovation Projects

Ideal for old building renovation projects without reserved ceiling space. The exposed vertical fan coil unit requires no concealed construction, saving renovation cost and construction time effectively.

4. Classroom & Campus Rooms

Featuring ultra-low operating noise and simple maintenance, the floor standing fan coil unit avoids disturbing teaching and learning. It stably adjusts indoor temperature for school classrooms and offices.

5. Residential & Villa Rooms

Suitable for villas, apartments and family living spaces. The high-efficiency floor fan coil unit achieves fast temperature adjustment, bringing energy-saving and comfortable indoor climate for residential use.

floor_standing_fan_coil_unit_installation_guide_2010x782

Installation Operation Process of Floor Standing Fan Coil Unit

Step 1: Site Checking and Preparation

Check the installation ground flatness, water pipeline interface and power supply condition. Confirm the model, accessories and technical parameters match the design requirements before installation.

Step 2: Unit Positioning and Placement

Place the floor standing fan coil unit on a flat and solid ground. Adjust the foot supports to keep the whole unit vertical and stable to avoid vibration and tilting during operation.

Step 3: Water Pipeline Connection

Connect the chilled and hot water pipes tightly with sealing fittings. Ensure firm connection without water leakage. Keep smooth pipeline layout to guarantee stable water flow and heat exchange performance.

Step 4: Condensate Drainage Installation

Install the drain pipe with standard slope to ensure smooth condensate discharge. Conduct a water leakage test to prevent dripping and indoor water accumulation during long-term operation.

Step 5: Electrical Wiring Connection

Connect power wires and control wires strictly according to the wiring diagram. Ensure reliable grounding and correct circuit connection to avoid electrical failure and hidden safety risks.

Step 6: Commissioning and Trial Operation

Turn on the power and test fan speed, cooling and heating modes. Check for abnormal noise, water leakage and airflow issues. Confirm the floor fan coil unit runs stably at rated performance.

FAQ

1. What are the main differences between floor standing fan coil unit and horizontal concealed FCU?

Floor standing fan coil unit is exposed type without ceiling installation requirement. It is easier for maintenance and perfect for renovation projects, while horizontal FCU needs ceiling space for hidden mounting.

2.Can floor standing fan coil unit work with both 2-pipe and 4-pipe water systems?

3. How to handle condensate drainage for floor standing fan coil unit?

4. What is the noise level range of your floor standing fan coil unit?

5. What regular maintenance does a floor standing fan coil unit require?

Fan Coil Unit Fan Coil FCU Floor Standing Fan Coil Unit OEM Fan Coil WIFI Fan Coil Unit ODM Fan Coil OEM Fan Coil Unit ODM Fan Coil Unit

Related Products

Nulite R290 Water Source Inverter Heat Pump Geothermal System for Residential Underfloor Radiator Heating Hot Water OEM

Nulite Export R32 Inverter Geothermal Water Source Heat Pump Central Heating Cooling System for Home Underfloor

Model name:NL-FP		34LM	51LM	68LM	85LM	102LM	136LM	170LM	204LM	238LM
nominal air volume(m³/h)	high	340	510	680	850	1020	1360	1700	2040	2380
	middle	260	390	520	650	780	1040	1290	1580	1820
	low	180	270	360	450	530	710	890	1060	1240
Cooling capacity (w)	high	1800	2700	3600	4500	5400	7200	9000	10800	12600
	middle	1620	2450	3240	4050	4850	6480	7980	9580	11200
	low	1430	1990	2650	3220	3820	5140	6400	7480	8960
Heating capacity (w)	high	2700	4050	5400	6750	8100	10800	13500	16200	18900
	middle	2450	3680	4860	6120	7275	9980	11960	14200	16520
	low	2160	3240	4300	5200	6400	8600	9200	10800	12960
Conventional type noise dB(A)		≤35	≤36	≤38	≤40	≤43	≤44	≤45	≤46	≤49
High static press noisiness dB(A)		≤39	≤41	≤43	≤45	≤48	≤49	≤50	≤52	≤54
Input power (w)	Standard type	41	54	65	82	98	132	168	206	247
Input power (w)	Overpressure type	45	58	76	89	110	165	195	228	273
Outlet static press of unit（Pa)		12Pa,30Pa,50Pa
Electric power		Signal phase 220v 50HZ
thermal sink		louvered aluminum thermal sink, spacing of fins is 2.2mm
No. of wind wheel(n)		2	2	2	2	2	2	3	4	4
Heat exchanger	Model	3-row aluminum
	Structure model	copper stringing roll aluminum fin
	working pressure	1.2Mpa
	water pipe branching	DN20 pipe
	condensed water connecting hose	DN20 pipe
water volume (kg/h)		350	480	680	780	910	1140	1270	1320	1460
hydraulic resistance (kpa)		15	20	30	35	45	35	35	38	40
Weight（kg）	Horizontal concealed(WA)	16	19	21	22	23	25	35	38	45
Note： 1.all horizontal concealed type can be equipped with overpressure type（20Pa-30Pa），input power improves 1.5 times than the same grade fan coil with no overpressure. 2. The input power means those in high-level air volume. 3.The measure of nominal cooling capacity：room temperature DB t1 is 27℃,WB t2=19.5℃. 4.The measure of nominal cooling capacity：room temperature DB t1 is 21℃, water entering temperature tw is 60℃. 5. Galvanized sheet is used as panel. Please note when ordering if you need fingerprint-proof material as panel.